For the first time, biochar made by pyrolysis has its own quality standard under India's Fertiliser Control Order (FCO), the 1985 order that decides what can be manufactured and sold as fertiliser in the country. The Ministry of Agriculture and Farmers Welfare notified the change on 11 November 2026, and it took effect when it was published in the Gazette the next day.
The move follows S.O. 897(E) of February 2025, which created the "Organic Carbon Enhancer" category for fermented material from compressed biogas (CBG) plants. Pyrolysis biochar now sits alongside it, with its own specification.
What the order says
The order is issued under section 3 of the Essential Commodities Act, 1955. It defines an "Organic carbon enhancer manufactured by pyrolysis" as any organic material produced by the pyrolysis method. In the Hindi text of the Gazette, the term is पायरोलिसिस द्वारा निर्मित कार्बनिक कार्बन वर्धक, and the product is बायोचार (biochar).
The new category is written into the same clauses of the FCO that already cover organic fertilisers, non-edible de-oiled cake and Organic Carbon Enhancer from CBG plants: clauses 2(h), 2(q), 27B, 29 and 29D. Three new parts are added to Schedule VIII:
- Part D: the biochar specification
- Part E: how samples are drawn, following Schedule II, Part A
- Part F: the laboratory methods used to analyse them
Biochar specification under FCO Schedule VIII, Part D
| Parameter | FCO limit |
| Moisture, % by weight | 20 maximum |
| Organic carbon, % by weight | 30 minimum |
| H:Corg (molar ratio) | 0.7 maximum |
| pH | 6.5–9.5 |
| Electrical conductivity | Below 4 |
| Arsenic (as As₂O₃), mg/kg | 10 maximum |
| Cadmium (as Cd), mg/kg | 5 maximum |
| Chromium (as Cr), mg/kg | 50 maximum |
| Copper (as Cu), mg/kg | 300 maximum |
| Zinc (as Zn), mg/kg | 1,000 maximum |
| Lead (as Pb), mg/kg | 100 maximum |
| Mercury (as Hg), mg/kg | 0.15 maximum |
| Nickel (as Ni), mg/kg | 50 maximum |
Each limit does a specific job:
- Organic carbon confirms the product is genuinely carbon-rich, not ash or partly burnt biomass.
- H:Corg measures how fully the biomass has been converted into stable carbon. The 0.7 ceiling matches the threshold used by the European Biochar Certificate, so Indian and international buyers now read stability the same way.
- pH and electrical conductivity keep the product safe for soil and seedlings.
- Heavy metal caps protect farmland and the food grown on it. They also rule out biochar made from contaminated feedstock.
How biochar samples will be drawn and tested
Inspectors will draw samples using the FCO's standard method (Schedule II, Part A). Samples go to the Regional Centres of Natural and Organic Farming in Bengaluru, Bhubaneswar, Ghaziabad, Imphal or Nagpur, or to any laboratory notified by the Central or a State Government. Part F sets the methods:
- Moisture: about 5 g dried at 65 °C (±1 °C) for around 5 hours to constant weight
- Organic carbon: 10 g of oven-dried sample ignited in a muffle furnace at 650–700 °C for 6–8 hours; organic carbon is the organic matter lost divided by 1.724
- H:Corg: total carbon and hydrogen by dry combustion in a CNH analyser, with inorganic carbon measured by ASTM D4373 and subtracted
- pH: 25 g of biochar shaken in 500 ml of distilled water for 2 hours, filtered, then measured with a pH meter
- Heavy metals: the existing FCO methods in Schedule IV, Part D
What this means for farmers, producers and buyers
- A recognised product category. Biochar that meets Part D can now be sold as a notified Organic Carbon Enhancer under the FCO, not as an unclassified soil product. That opens doors to fertiliser dealers, state agriculture departments, farmer producer organisations (FPOs) and natural farming programmes.
- A quality floor. Char from kilns or pits that is under-pyrolysed, high in ash or made from contaminated material will struggle to pass. Consistent temperature and residence time now matter commercially, not just technically.
- Two markets for the same tonne. Biochar that goes into farmland can serve the domestic fertiliser market and, where the project is registered with a carbon removal standard, also earn carbon removal credits.
- Feedstock choice matters. The heavy metal limits, especially mercury at 0.15 mg/kg and cadmium at 5 mg/kg, are strict. Clean woody biomass and crop residues are the safest route; mixed or municipal waste needs careful testing.
The order sets the specification and the testing route. Producers should confirm registration, labelling and packing requirements for selling under the FCO with their state agriculture department or fertiliser controller.
How biochar from SGC's reactor compares
| Parameter | FCO limit | SGC reactor biochar (Juliflora, Isometric Class 1) |
| Organic carbon | 30% minimum | 80.9% or higher |
| Hydrogen to carbon ratio | 0.7 maximum | 0.38 or lower (H/C) |
| Process | Pyrolysis (not specified further) | Continuous pyrolysis, 400–450 °C, 60–90 minutes |
Biochar made from Prosopis juliflora in our patented continuous rotary reactor is certified Isometric Class 1. Its organic carbon is more than two and a half times the FCO minimum, and its H/C ratio is about half the ceiling. See the full biochar results.
Moisture, pH, conductivity and heavy metals depend on the feedstock and on how the biochar is quenched and stored, so every new feedstock should be tested at a notified laboratory.
Our reactor is heated indirectly through a jacketed drum, so the reaction zone stays free of oxygen. Feed and discharge are continuous, which keeps temperature and residence time steady from batch to batch. That control is what produces stable, low H:C biochar. See the reactor specifications and our pyrolysis technology.
What biochar producers should do now
- Test your current biochar against every Part D parameter at one of the notified laboratories.
- Fix your feedstock sources, keep records of each lot, and keep contaminated material out of the reactor.
- Control moisture at discharge and in storage so the product stays at or below 20%.
- Confirm registration, labelling and packing rules with your state agriculture department before selling under the FCO.
- Plan capacity for the market that opens up. Our continuous reactors run at 12–100 TPD (0.5–4.2 TPH) per line, with multi-line plants for larger volumes. Talk to us about your feedstock and capacity.
Frequently asked questions
What is an Organic Carbon Enhancer manufactured by pyrolysis?
It is the new product category in India's Fertiliser Control Order for any organic material produced by pyrolysis. Biochar is the first product listed under it, in Part D of Schedule VIII.
When did the biochar standard come into force?
The Fertiliser (Inorganic, Organic or Mixed) (Control) Eleventh Amendment Order, 2026, S.O. 6170(E), is dated 11 November 2026 and came into force on its publication in the Gazette of India on 12 November 2026.
What is the minimum organic carbon for biochar under the FCO?
At least 30% organic carbon by weight, with an H:Corg ratio of no more than 0.7, moisture of no more than 20%, pH between 6.5 and 9.5, electrical conductivity below 4, and limits on eight heavy metals.
Where will biochar samples be tested?
At the Regional Centres of Natural and Organic Farming in Bengaluru, Bhubaneswar, Ghaziabad, Imphal and Nagpur, or at any laboratory notified by the Central or a State Government.
Does biochar from any feedstock qualify?
Only if the finished biochar meets every limit in Part D, including the heavy metal caps. Clean woody biomass and crop residues usually pass more easily than contaminated or mixed waste, so each new feedstock should be tested.
Is this the same as the Organic Carbon Enhancer from CBG plants?
No. S.O. 897(E) of February 2025 added Organic Carbon Enhancer from compressed biogas plants, which is fermented material. The 2026 order adds a separate category for material made by pyrolysis, such as biochar.
Source: Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), No. 5931, New Delhi, 12 November 2026. S.O. 6170(E), Ministry of Agriculture and Farmers Welfare (Department of Agriculture and Farmers Welfare), dated 11 November 2026, F. No. 2-2/2026-FLU, signed by Franklin L. Khobung, Joint Secretary. Available on the e-Gazette of India.
About the author: Manoj Koshy is Co-Founder and Director of Shaiva Green Carbons, which designs and manufactures patented continuous reactors for pyrolysis and torrefaction in Greater Noida, India.